Idiomas disponibles
Idiomas disponibles
Safety Information
Stockholm, 24 October 2022
Carl von Schantz, Managing Director
Signature of issuer
UK DECLARATION OF INCORPORATION
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
The Supply of Machinery (Safety) Regulations 2008 S.I.
2008/1597:
And that this partly completed machinery is in conformity
with the provisions of the following other UK Regulation(s):
This partly completed machinery must not be put into service
until the final machinery into which it is to be incorporated
has been declared in conformity with provisions of The Sup-
ply of Machinery (Safety) Regulations 2008 S.I. 2008/1597,
where appropriate.
The following (parts/clauses of) Designated Standards have
been applied:
The relevant technical documentation was compiled and was
communicated in accordance with The Supply of Machinery
(Safety) Regulations 2008 S.I. 2008/1597 part B of Annex
VII. Authorities can request the technical file in electronic
form from:
Aleksandra Duric, Product Compliance Manager, Atlas
Copco Industrial Technique AB, SE-105 23 Stockholm Swe-
den
Stockholm, 24 October 2022
Carl von Schantz, Managing Director
Signature of issuer
Authorised Representative UK:
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead
Hertfordshire HP2 7EA
Safety
DO NOT DISCARD - GIVE TO USER
4
© Atlas Copco Industrial Technique AB - 9846 0328 00
Fixtured Tightening Module
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.
Intended use of the Fixtured Tightening
Module
This product is designed to feed and hold the screws in posi-
tion and apply the specified Torque to the joint in an auto-
mated process. The tightening process is controlled by the
Power Focus 6000. No other use is permitted.
The partly completed machine is a fixtured screw feeding sys-
tem intended for producing screw connections. The screw
feeding is proceeded automatically by a Screw Feeding Unit.
The Fixtured Screw Feeding Tightening Module and the
Screw Feeding Unit are powered and controlled by the Power
Focus 6000 and customer PLC (Programmable Logic Con-
troller).
• The tightening module should be used only indoors.
• The tightening module should be put into operation only
with the system components described here.
Permitted use of the Fixtured Tightening Module
components
• Fixtured Tightening Module and Driving Tool - Requires
a defined torque or a defined angle of rotation.
• Cables (electrical) - Provides electrical supply and con-
trols the screw fastening system.
• Hoses (pneumatic) - Supplies the Fixtured Tightening
Module with pneumatic energy from the Screw Feeding
Unit.
• Feeding Tube - Transports fasteners from the Screw
Feeding Unit to the feeding head.
• Power Focus 6000 - Controls and monitors the screw fas-
tening process.
• Screw Feeding Unit - Feeds the Fixtured Tightening
Module with screws.
