Idiomas disponibles
Idiomas disponibles
• Press the Start/Stop button
in order to start the device 1 with the se-
lected settings or the selected program.
- The hot air symbol
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- If necessary, the program symbol 33
is displayed.
• If you want to stop the process while the
device 1 is running, press the Start/
Stop button
31.
- The display 2 shows OFF.
- The fan continues to run and the hot
air symbol
- After approx. 20 seconds the fan will
stop and 5 signal tones are heard.
The device 1 is in standby mode.
Only the symbol
in the display 2.
Quick start function
You can start the device with preset temper-
ature and cooking time without selecting a
program.
1. Switch the device 1 on from standby
with the Start/Stop button
2. Press the Start/Stop button
start the cooking process with the preset
temperature of 190 °C and the preset
cooking time of 15 min.
11.5 Switching on the
lighting
When the light symbol
display 2, you can switch the interior light-
ing on and off:
• Press the light button
lighting on or off again.
• The light symbol
lighting is on.
• The lighting will switch off automatically
after approx. 2 minutes.
98
GB
31 again
23 flashes.
23 flashes.
31 can be seen
31.
again to
32 is visible in the
32 to switch the
32 flashes while the
11.6 Manual settings
While the device 1 is switched on, the tem-
perature buttons
+/– 29 are visible. You can use
buttons
these to change the settings for temperature
and cooking time whenever you like, e.g.
even if a program is already running.
• With the temperature buttons
you can set the temperature between
40 °C and 200 °C:
- Press briefly for 5 °C steps.
- Keep pressed for fast forward/re-
verse.
• With the timer buttons
can set the cooking time between 1 and
60 minutes:
- Press briefly for 1-minute steps.
- Keep pressed for 5-minute steps.
NOTE: when the food dehydration
program
is set, the temperature can only
be adjusted up to a maximum of 80 °C. The
cooking time can be set between 2 (02:00 )
and 24 (24:00 ) hours in 30-minute steps.
11.7 Switching on the
rotation function
When the rotation symbol
the display 2, you can switch the rotation
function on and off manually:
• Press the rotation button
the rotation function on or off again.
• The rotation symbol
the rotation function is on.
NOTES:
• When the rotary spit program
the rotation function is switched on auto-
matically.
• If you use the rotary spit 10 or the rotat-
ing basket 12 with a different program,
switch on the rotation function manually.
+/– 22 and the timer
+/– 22
+/– 29 you
30 is visible in
30 to switch
30 flashes while
is set,
