Adjusting the temples
The temples can be adjusted in length.
Adjust the temples to the desired length by
pushing/pulling.
Transport
The goggles should be transported in a
suitable protective cover (e.g. case) to
avoid scratches and damage.
Cleaning and
Maintenance
-
the safety goggles must be cleaned
with mild soap and lukewarm water
-
dry the goggles with a clean cotton cloth.
-
Do not leave to dry near heat sources.
-
disinfect the safety goggles frequently,
but do not use solvents.
Maintenance and
storage
If the goggles are scratched or damaged,
replace the entire item. We recommend
storing these safety goggles in an appro-
priate protective cover when you are not
using them.
Store in a dry and well-ventilated place out
of reach of sunlight, chemicals and cleaning
agents.
Online shop
You can obtain spare parts from
www.grizzlytools.shop
Waste Disposal
and Environmental
Protection
The products and packaging should be
properly recycled.
Guarantee
Dear Customer,
The safety goggles come with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect oc-
curs within three years from the date of
purchasing of this product, the product will
be repaired or replaced by us for free – ac-
cording to our choice. This warranty service
requires you to present the defective device
and proof of purchase (sales receipt) within
three years and describe briefly in writing
the nature of the defect and when it oc-
curred.
If the defect is covered by our guarantee,
you will receive either the repaired prod-
uct or a new product. No new guarantee
period begins on repair or replacement of
the product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
GB
MT
11