Parkside PBK 4 B3 Traducción Del Manual De Instrucción Original página 43

Sound pressure level
) ....................... 99.5 dB; K
(L
pA
Measured sound power level
) ...............110.1 dB; K
(L
WA
PBK 4 B3-2 - String trimmer, 3-tooth blade
Cutting circle ............... 25.5 cm/255 mm
Rotational speed n
Rotational speed of 3-tooth blade
n ...................................10000 rpm
max
)
Vibration (a
h
at handle ..........8.49 m/s
at round handle .6.20 m/s
Emission sound pressure level at the
operator's location (L
Measured sound power level
) ...............109.6 dB; K
(L
WA
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
Warning: The vibration emission
value whilst actually using the pow-
er tool may vary from the given values de-
pending on the type and way in which the
power tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures to
reduce vibration exposure are the wearing
of gloves when using the tool and limiting
the working hours. All parts of the operat-
ing cycle have to be considered while do-
ing so (for example, times when the power
tool is switched off and times when it is
switched on but running without any load).
= 3 dB
pA
= 1.98 dB
WA
..................7800 rpm
0
2 ; K= 1.5 m/s
; K= 1.5 m/s
2
) ..98.9 dB; K
= 3 dB
pA pA
= 1.98 dB
WA
The carbon dioxide (CO2) emission value
determined by an EU type-approval proce-
dure for this device is: 1063.00 g/kWh
Safety information
This section describes the basic safety rules
when working with the device.
Symbols used in the
instruction manual
2
2
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage
Hazard symbol with information on
damage prevention
Advisory symbol with information
on how to best use the device
Symbols on the device
Caution!
Read the instruction manual and fol-
low all warnings and safety instruc-
tions.
Wear eye protection!
Wear hearing protection!
Wear a safety helmet!
Wear safety gloves.
Wear cut-resistant work clothing.
Wear non-slip safety shoes.
GB MT
43