Parkside PBK 4 B3 Traducción Del Manual De Instrucción Original página 557

Content
Introduction .................................9
Intended Use ................................9
Safety goggles .................................. 9
Technical Data ............................10
Notes on Safety .........................10
Markings on the safety goggles ........ 10
Safety instructions for safety goggles . 10
Adjusting the temples.................11
Transport ...................................11
Cleaning and Maintenance .........11
Maintenance and storage ...........11
Online shop ...............................11
Waste Disposal
and Environmental Protection .....11
Guarantee .................................11
Repair Service ............................12
Service-Center ............................13
Manufacturer .............................13
Translation of the original EU
declaration of conformity ...........13
Introduction
Congratulations on purchasing your new
product. With it, you have chosen a high
quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The instruction manual forms part
of this product. They contain impor-
tant information on safety, use and
disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended Use
Any other use not expressly approved in
the present instruction manual can damage
the device and thus present a substantial
risk for the user.
Safety goggles
These safety goggles are intended for eye
protection when cutting wood in a domes-
tic environment.
Optical class:
1 Safety goggles are suitable for work
that demands very high visual per-
formance (maximum dioptre devia-
tion +/- 0.06)
The optical class marking on your safety
goggles defines how long the safety
goggles can be used for and specifies the
maximum dioptre deviation.
These safety goggles belong to optical
class 1.
They are therefore suitable for long-term
use
Protection class:
Low energy impact
F
(6 mm ball at 45 m/s)
The mechanical strength of these safety
goggles has been verified by means of a
bullet test with a 6 mm steel ball at 45 m/s
and awarded protection class "F" for low
energy impacts.
GB MT
9