Idiomas disponibles
Idiomas disponibles
COMMISSIONING AND USE
9.3.2 MENU
STAND-BY
If ENABLED
, once the temperature set in "SET ROOM" is reached,
v
the appliance enters the modulation mode and/or switches off. Dur-
ing the modulation phase, the wording "OK ST-BY" will appear on the
display, while when the appliance shuts down, "STAND-BY" appears.
If DISABLED
, once the temperature set in "SET ROOM" is reached,
o
the appliance enters the modulation mode and the switch-off is ex-
cluded. During the modulation phase, "MODULATION" will appear on
the display.
The figure below shows the display with the STAND-BY function EN-
ABLED.
STAND-BY
CHRONO
The CHRONO menu allows for accessing the various time schedules
for the switching on and off of the appliance (daily, weekly and week-
end).
In order to prevent any undesired switching on/off operations, only
activate and use a single programme at a time (daily, weekly or week-
end programme).
ENABL. CHRONO sub-menu
The ENABL. CHRONO sub-menu allows for enabling and disabling all
the CHRONO functions. For it to work properly, it should be enabled
with the
or
button only when at least one on/off programme
+
-
(daily, weekly or weekend) is enabled.
The figure below shows the display with the GENERAL CHRONO pro-
gramme enabled.
ENABL. CHRONO
CS.SB80.IST_EN_Rev. 2.0_09-23
DAILY CHRONO sub-menu
The DAILY CHRONO sub-menu allows for enabling and disabling DAI-
LY TIMER functions. In this mode it is possible to programme up to
maximum 2 time slots (it is not necessary to programme them both).
The
or
can be used to modify the selected value. With the
+
-
button the user can select the next value, while with the
the previous value is selected.
The
button can be used to return to the previous menu.
O
1
2
1 Enable field: for the device to work properly, this field must be
enabled and at least one time schedule must have been set
Fig. 23
2 Time slot: indicates the number of the chosen time slot among
two available slots
3 Switch-on time: indicates the time at which the appliance must
switch on. When set to "OFF" it tells the timer to ignore the
switch-on command
4 Switch-off time: indicates the time at which the appliance must
switch off. When set to "OFF" it tells the timer to ignore the
switch-off command
5 Power set-point: indicates the working power in the selected
time slot
6 Room set-point: indicates the temperature set in the room during
the selected time slot
Fig. 24
DAILY CHRONO
1
OFF
3
1
20
OFF
EN
s
button
E
3
5
6
4
Fig. 25
23
