Garant VG Basic Manual De Uso página 23

SK 40
ID:
1000
Fig. 10: Restricting the measurement range
8. Settings
Sort adapters
Language
Printer
Support
Parameters
Device Information
Manual
Exit
2
1 Chosen menu, settings
8.1. ADAPTER SETTINGS
i
Specify the sorting of the adapters.
Adapter Settings
8.2. LANGUAGE
i
Click on the respective flag to load the desired screen language.
Language
German English
8.3. PRINTER
i
Label writer LabelWriter 450 (Article no. 085505 LW450) and
Brother QL-800 are pre-installed and ready for use on the pre-setting
device.
 Use only these printers, no other printers can be installed.
ü Printer connected to the panel PC with a USB cable, power cable
connected and printer switched on.
ü Printer selected in the Windows operating system using System
Settings/Devices and Printers.
ü Suitable label size and alignment selected in the Windows oper-
ating system using System Settings.
1. Insert labels into the printer and check the alignment.
Print label
2. Press , assign a name to the tool.
X 45.00
R
Z -2.75
Print label
1
2 Active selection
Sort adapters
Alphabetical
Creation date
Last used
Russian Chinese
3. After acknowledgement, print the displayed measurement val-
ues.
mm
8.4. SUPPORT
mm
Online support
i
Contact Hoffmann Group Customer Service in order to obtain up-
dates or further assistance by means of remote access.
ü Internet connection must be set up and active via WLAN.
ü The serial number will be displayed.
To the online support page
1. Press
2. Request the password by phone, and input it via TeamViewer.
3. Permit remote control of the pre-setting device by Customer
Service.
8.5. PARAMETERS
i
The password cannot be changed.
Parameters
1. Release the parameter functions by inputting the password
"garant".
2. Acknowledge by pressing Enter on the virtual keyboard.
Lighting settings
Camera alignment
Fig. 11: Parameter settings
8.5.1. Light settings
i
Adjust the lighting settings for optimum light capture by the cam-
era.
Fig. 12: Example of lighting settings
 Horizontal lines show the light intensity in the live image at the
top, in the middle and at the bottom.
 Vertical lines show the light intensity in the live image at the
right side, in the middle and at the left side.
ü Camera lens and lighting lens have been cleaned.
www.hoffmann-group.com
Enable parameter functions for
calibration:
Password
Pixel calibration
Parallelism
calibration
Light settings
Brightness
Save and exit
en
.
73 %
23