Know Your Air Compressor - DeWalt DXCM601 Manual De Instrucciones

WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN
• Serious injury can result from
attempting to lift too heavy an
object.
CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
• Under some conditions and
duration of use, noise from
this product may contribute to
hearing loss.
SAVE THESE INSTRUCTIONS FOR FUTURE

Know Your Air Compressor

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE
OPERATING YOUR UNIT. Compare the illustrations with your unit
to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.
HOW TO PREVENT IT
• The compressor is too heavy
to be lifted by one person.
Obtain assistance from others
before lifting.
HOW TO PREVENT IT
• Always wear certified safety
equipment: ANSI S12.6
(S3.19) hearing protection.
USE
FEATURES
AUTO (-) / OFF (O) SWITCH
Place this switch (B) in the AUTO (-) position to
provide automatic power to the pressure switch
and OFF (O) to remove power at the end of each
use. NOTE: ALWAYS ensure the switch (B) is in
the OFF (O) position and unit is unplugged before
removing or replacing pressure switch cover.
PRESSURE SWITCH
The pressure switch (not shown) automatically starts the motor when
the air tank pressure drops below the factory set cut-in pressure. It
stops the motor when the air tank pressure reaches the factory set
cut-out pressure.
SAFETY VALVE
This valve (E) is designed to prevent system
failures by relieving pressure from the system
when the compressed air reaches a predeter-
mined level. The valve is preset by the manu-
facturer and must not be removed or
modified in any way.
CHECK VALVE
When the air compressor is operating, the
check valve (I) is open, allowing compressed
air to enter the air tank. When the air
compressor reaches cut-out pressure, the
check valve closes, allowing air pressure to
remain inside the air tank.
10
B
E
I