Corghi 601 Manual De Uso página 46

USE OF THE WHEEL BALANCER
1) Precautions during transportation of the machine
A. Use maximum care during the machine transportation and unpacking operations pre-
vent it from being damaged.
B. Make sure that the machine has not been damaged during transportation, detect any
defect and show it to the carrier, then record it on the relevant document.
C. Inspect the structure so as to make sure that the data indicated on the machine and
motor identification plates match those requested. In case of doubt, communicate them
at once so that the problem can solved promptly.
D. All the adjustments and operations concerning the electrical installation must be
performed by an authorized operator.
GENERAL CONDITIONS OF USE
The wheel balancers described in this manual must be used exclusively to measure the
extent and position of car wheel unbalances, within the limits specified in the technical
specification section. Furthermore, models equipped with motors must be provided with
a suitable guard, fitted with a safety device, which must be lowered during the wheel
spin operation.
WARNING
Any use other than those described in this manual is to be considered improper and
unreasonable.
CAUTION
Do not start the machine without the wheel locking equipment.
WARNING
Do not use the machine without the guard and do not tamper with the safety device.
CAUTION
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.
WARNING
Only original CORGHI equipment is recommended for use with the machine.
46 Operator's manual @ 601