Corghi EM 9250 CompactLine Manual De Uso página 109

- press the key to confirm the previ-
ous value and set the machine for diameter
entry (-d-)
- read the rated rim diameter value on the
tyre
- modify the displayed diameter value by
pressing the
the read number is set
- press the key to confirm the previ-
ous value and set the machine for distance data entry (-A-)
- bring the distance measuring arm into contact with the inner side of the rim (Fig.11)
- read the distance value between the wheel and the body on the rule (A, Fig.13)
- modify the displayed distance value by pressing the
read number is set
- on completion, press
of the new dimensions, or
WARNING
If the diameter and distance values between the two balancing planes, recalculated
on a statistical basis starting from the rated geometric data of the wheel, exceed the
normally accepted interval stated in the technical data section, the message "A 5" is
displayed.
EM 9250 - EM 9250 C CompactLine Operator's manual
keys until
to display the unbalance values recalculated on the basis
to perform a wheel spin.
13
keys until the
UK
109