Maintenance; Information Regarding Machine Demolition - Corghi EM 9250 CompactLine Manual De Uso

LED light and/or laser indicator are NOT working
Check if the device(s) is (are) configured correctly as shown in the paragraphs "SET UP -
➥
LED light " and "SET UP - Laser indicator". If the problem persists after checking the correct
device configuration, call the technical support centre.
CAUTION
The "Spare parts" handbook does not authorise the user to carry out work on the machine with
the exception of those operations explicitly described in the User Manual. It only enables the
user to provide the technical assistance service with precise information, to minimise delays.
CAUTION
The company is not to be held responsible for any claims deriving from the use of non-original
spare parts or accessories.
CAUTION
Unplug the machine from the socket and make sure that all moving parts have been locked
before making any adjustments or maintenance work.
Do not remove or modify any part of the machine (except for service interventions).
WARNING
Keep the working area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine.
Take all possible measures to prevent dust from building up or raising during cleaning
operations.
Keep the wheel balancer shaft, the securing ring nut, the centring cones and flange clean. These
components can be cleaned using a brush previously dripped in environmentally friendly solvents.
Handle cones and flanges carefully so as to avoid accidental dropping and subsequent damage
that would affect centring accuracy.
After use, store cones and flanges in a place where they are suitably protected from dust and dirt.
If necessary, use ethyl alcohol to clean the display panel.
Perform the calibration procedure at least once every six months.
INFORMATION REGARDING
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
and dispose of them separately in accordance with current provisions as prescribed by law.
146

MAINTENANCE

MACHINE DEMOLITION
EM 9250 - EM 9250 C CompactLine Operator's manual