POWER UNIT/COOLING SYSTEM
CHECKING THE TIMING BELT
1. Remove:
Recoil starter 1
Dust cover 2
2. Check:
Timing belt
Wear/damage
NOTE:
Install the timing belt with the part name
facing up.
3. Install:
Dust cover 2
Recoil starter 1
POWER UNIT/COOLING SYSTEM
CHECKING THE COOLING WATER
DISCHARGE
Check:
Cooling water discharge
Dose not flow
cooling water passage.
Checking steps:
(1)Place the lower unit in water.
(2)Start the engine.
(3)Check that water flows from the pilot
water outlet.
3-19
Replace.
Clean and check the