Beem CM5418C-GS Manual De Instrucciones página 30

EN
Inserting / Removing the Sieve Insert
1. Insert the appropriate sieve insert (7, 8) into the portafilter (9).
2. To remove the sieve insert from the portafilter, use an implement to help you if necessary.
This can be slid between the portafilter and sieve insert to lever out the sieve insert.
Filling the Portafilter
1. After you have inserted the sieve insert into the portafilter (9), use the measuring
spoon (6) to fill it with espresso powder. Make sure that you do not overfill the sieve insert.
2. Press down the espresso powder in the sieve insert with the tamper (6).
3. Remove excess espresso powder from the rim of the portafilter.
Inserting the Portafilter into the Device
1. Hold the filled portafilter (9) firmly by the handle and insert it under the label LOCK into
the portafilter mount (14).
2. Turn the portafilter to the right until it is under the label CLOSE. The handle points
straight forwards.
Removing the Portafilter from the Device
1. Hold the portafilter (9) by the handle and turn it to the left until it is under the label LOCK.
2. Pull the portafilter down out of the device.
Emptying the Sieve Insert
1. Tap out the portafilter over a dustbin or knock box. When you do this, make sure that the
sieve insert does not fall out at the same time.
2. Remove the sieve insert (see the "Preparation" chapter – "Inserting / Removing the Sieve
Insert").
3. Clean the sieve insert (see the "Cleaning and Care" chapter).
Do you not have a suitable knock box available? But is opening the dustbin each time too much
hassle for you? Not a problem! This is no longer a problem with our BEEM Knock Box (article
number 03994). This attractive knock box has a silicone-covered knocking bar – this protects the
portafilter and makes it easier to clean later on. And with a capacity of 650 ml, the BEEM Knock
Box offers plenty of space for several rounds of making coffee.
30