Roca IN-WASH INSIGNIA A803104001 Manual De Instrucciones página 41

Idiomas disponibles

Idiomas disponibles

3.4.1 CUSTOMISATION OF THE CLEANING AND DRYING SETTINGS
The In-Wash Insignia allows to change the
pre-set settings of Temperature, Pressure
and Position, which are controlled through the
remote control. By default, the starting values
are:
Average temperature: 36ºC perineal and
anal.
Average pressure: 0.55 L/min perineal, 0.75
L/min anal.
Position: 3 Perineal, 3 anal.
To set a value other than the pre-set one, follow
these steps:
1.
Adjust
each
Pressure or Position) to the desired level
in the active function (anal and perianal
washing, drying, etc.).
2.
Simultaneously press for 5 seconds the "-" and "+" keys of the parameter (Temperature,
Pressure or Position) to be set. A beep is heard and the lights on the remote control will
blink indicating that the adjustment has been memorized.
3.
Repeat the above steps for each function and parameter you want to change to a setting
other than the factory default.
If the remote linking process had to be carried out again, these memorized values would be
lost. To return to the factory default values, see section 3.5.
3.4.2 OPERATING MODES LED LIGHTS
There are five operating modes for light in the In-Wash Insignia:
MODE 1 STANDARD:
This is the pre-set mode of the product.
The corner and bowl lights remain switched off while the In-Wash Insignia is not in use.
The bowl light is ON when the user is detected. They remain switched on while the product is
in use and they switch off one minute after they stop detecting the user.
MODE 2 STANDAR WITH NIGHT LIGHT ONLY IN THE SEAT:
When this mode is activated, the lights of the In-Wash Insignia switch on daily for 8 hours and
during the remaining 16 hours the In-Wash Insignia remains in Standard mode.
MODE 3 STANDARD WITH NIGHT LIGHT IN THE SIDE PANELS AND SEAT:
The corner and bowl lights are ON when the user is detected.
When this mode is activated, the lights of the In-Wash Insignia switch on daily for 8 hours and
they remain switched off for the remaining 16 hours.
parameter
(Temperature,
41
5 s.
x2
loading

Este manual también es adecuado para:

In-wash insignia a803105001