Idiomas disponibles
Idiomas disponibles
1.
Press the Stop button on the In-Wash remote control for 5 seconds.
2.
The LEDs on the remote blink for 10 second. During this time, press the 'hygienic flush'
5 s.
button on the auxiliary side control (middle button with blue water drop icon) to link the
10 s.
e-bidet with the remote.
3.
Automatically the self-test process begins, which may take a few minutes.
4.
When the self-test process ends, 2 "beeps" are heard indicating that the remote has been
linked correctly to the e-bidet.
Do not disconnect the appliance during this process.
2.4.2 FLUSH REMOTE CONTROL LINKING PROCESS
1
5 s.
10 s.
1.
Press the "Hygienic flush" button (middle button with blue water drop icon) on the In-
Wash remote flush remote control for 5 seconds.
2.
The LEDs on the remote blink for 10 second. During this time, press the 'hygienic flush'
button on the auxiliary side control (middle button with blue water drop icon) to link the
e-bidet with the remote flush remote control.
3.
A half flush is preformed automatically and 2 "beeps" are heard indicating that the remote
has been linked correctly.
Do not disconnect the appliance during this process.
2
35
3
