Roca IN-WASH INSIGNIA A803104001 Manual De Instrucciones página 32

Idiomas disponibles

Idiomas disponibles

Any other use will not be deemed in accordance with its purpose and Roca will not accept any
responsibility for the consequences that might arise from an improper use.
Should there be an operational failure, please check the Problem resolution chart (see
section 5. TROUBLESHOOTING).
To lean back when you are sitting on the In-Wash Insignia will facilitate the adjustment of the
nozzle and will reduce possible splashing.
Do not urinate or splash water or cleaning agents on the main body or the mains plug.
If you do it, you may cause a fire, electric shock, heat or a short-circuit and you may cause
stains or a malfunction.
Do not ever obstruct any opening in the product, nor should you drop or insert any objects in
them. Keep the air inlet free of lint.
Do not place any open flames, candles, cigarretes or similar items over the product and do not
drop flammable items or cigarretes near or inside the product.
Do not step on the product.
Avoid forcing the seat or the cover.
Keep the presence sensor clean to ensure the proper performance of the functions.
Please do not bend, pull or twist the power cable, nor should you place heavy objects on it.
If there is a water leak, always close the shut-off valve.
Do not use a booster seat for children or adults if you are going to use the In-Wash Insignia.
To avoid dropping the remote control, place it on its base when you are not using it.
1.1.4 MAINTENANCE PRECAUTIONS
Stop the product if you are not going to use it for a long period of time. (Check section 3.6 of
this manual).
Do not disassemble or repair the product; please contact Technical Assistance in case of
breakdown. Any repairs should be carried out by authorised staff, using original spare parts
and accessories.
When you use cleaning agents to clean the WC, clean it and remove it within 3 minutes,
leaving the seat and cover always open.
Clean any remains of detergent from the WC bowl. (If the vapour from a WC cleanser enters
the main unit, it may cause a malfunction).
1.2 ENVIRONMENTAL CONDITIONS
The room temperature should not be below 4ºC or over 40ºC.
When the room temperature drops below 4ºC, avoid damages due to freezing; frozen water
pipes could damage the In-Wash Insignia and the pipes, resulting in a water leak; regulate the
room temperature to prevent the pipes and hoses from freezing during the cold months.
32
loading

Este manual también es adecuado para:

In-wash insignia a803105001