Mondolfo Ferro Aquila Tornado Manual De Uso página 159

10-
Move the
position.
11- Move the tool holder head away from the work area by operating controls
and
.
Position the bead pressing tool in the correct
rest position so that it does not interfere with
the work area.
NOTE: If the tyre is particularly soft, the fi rst bead
can be mounted with the mounting tool positio-
ned on the lower trolley to the side of the bead
breaker disc.
- place the tool in the work position by pulling
out the specifi c knob (see Fig. 28a - 28b);
- operating the
tool in order to move it near the upper rim edge
(see Fig. 28c);
User manual Aquila Tornado
lever downwards to bring the lower bead breaker disc to the rest
CAUTION!
control, lift the mounting
28b
28a
28c
159