Mondolfo Ferro Aquila Tornado Manual De Uso página 128

1.2.e. Air Pressures
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over infl ating the tyre.
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi (15 bar).
• The operating pressure (indicated on the regulator) is 145 psi (10 bar).
• The tyre infl ation pressure (displayed on the pressure gauge) must never exceed the
pressure indicated by the manufacturer on the sidewall of the tyre itself.
2. Activate the air infl ation jets only when inserting the bead.
3. Bleed air pressure system before disconnecting supply line or other pneumatic
components. Air is stored in a reservoir for operation of infl ation jets.
4. Only activate the air infl ation jets if the wheel is clamped correctly on the tyre
changer and the tyre is completely mounted.
1.3. Additional notes regarding the wheel/tyre
Wheels equipped with pressure sensors and special wheels or tyres may require additional special
procedures. Consult the service manuals from the manufacturer of the wheels and tyres.
1.4. Intended Use of The Machine
This machine must only be used to demount and mount vehicle tyres from/on the rims,
using the provided tools. Any other use is improper and can result in an accident.
The machine is not intended for working with motorcycle wheels.
128
DANGER
• EXPLOSION HAZARD
• Do not exceed the pressure recommended by the tyre
manufacturer. Always match the tyre and rim dimensions.
• Avoid personal injury or death
CAUTION!
User manual Aquila Tornado