Mondolfo Ferro Aquila Tornado Manual De Uso página 158

4- Move the
pressure on the tyre (Fig. 27c).
5- Keep the section of the tyre with the lower bead
not yet inserted in the rim partially depressed and
turn the turntable until the fi rst bead is
completely inserted.
6- Position the bead presser to the side of the
mounting tool.
N.B.: If necessary, also use the bead pressing
tool clamps.
7- Operate the
pressing tool until the upper bead is in the well
(see Fig. 27d).
8- Press the
til the second bead is mounted (Fig. 27e - Fig. 27f).
Avoid personal injury. Make sure the top bead is
correctly inserted in the rim well, throughout the
mounting stage.
9- Remove the bead pressing tool as well as the
bead pressing tool clamps if used.
158
lever downwards to apply
control to lower the bead
pedal to start the rotation un-
CAUTION!
27f
User manual Aquila Tornado
27b
27c
27d
27e