Mondolfo Ferro Aquila Tornado Manual De Uso página 155

5.5.c. Demounting
1- Press the
tool to the work position (Fig. 26a).
2- Move the
demounting tool in contact with the tyre (Fig. 26b).
3- Rotate the wheel, exercising pressure on the
pedal while moving the
downwards until completely inserting the mobile
tool under the bead (Fig. 26c).
4- Keeping the wheel in rotation, press and hold
down the
If necessary, operate the
the head further.
5- After hooking the bead, release the
button and stop the rotation.
6- Move the
mounting tool until moving it above the rim edge
(Fig. 26d).
Facilitate the operation by using the lower bead
breaker disc: operate the
the disc in order to move the lower bead in the
centre of the well.
User manual Aquila Tornado
button to move the demounting
lever downwards to place the
button to hook the bead.
control to lower
lever upwards to lift the de-
control to lift
lever
26a
26b
26c
26d
155