Important Information
•
It is appropriate to read and understand the User Manual. Failure
to follow the instructions may result in complications and void the
product warranty.
•
In all instances, if you have questions, call BIOFLEX
and request the advice of a consultant.
•
This unit is best utilized for the treatment of the conditions listed in
the manual.
•
The device must be used in a dry environment and should be kept
away from moisture at all times.
•
The system is not waterproof. Do not allow it to become wet, do not
rinse under water or use while bathing.
•
Do not use the system while operating a vehicle or machinery.
•
Do not exert excessive pressure or twisting motions on the Array as
this may damage the system circuitry.
•
Do not pull or wrap cables around the Treatment Array too tightly.
•
Do not attempt to modify or open any part of the system.
•
Do not use the system over the eyes. It is inappropriate to do this as it
may irritate or even damage the eyes.
•
Use dark glasses if your eyes are sensitive to the light emanating from
the Treatment Array or while treating upper body areas.
•
Do not use the system as a passenger in a vehicle. The bright light may
distract the driver.
•
Do not leave the device unattended while in operational mode.
•
Keep the system out of the reach of children or incapacitated
individuals who are deemed unable to operate it properly.
30
MN 421.012 Rev 3
at 1-844-770-0177
®
System Troubleshooting
This section summarizes the most common problems encountered with
the Personal System. If you are unable to solve the problem with the
information below, contact BIOFLEX
Problem
Possible Cause
Part or all of the
System has been
system becomes
dropped or otherwise
damaged and
damaged.
does not work.
System has
i.e. water,
become
humidity, etc.
contaminated
by liquids.
Service at 1-844-770-0177.
®
Solution
Check all power
connections. Make certain
all cables are secure and
properly connected.
Press the Power button
on the Controller Unit.
If it does not power on,
contact BIOFLEX
Service.
®
Immediately unplug all
system components from
the electrical outlet.
Dry using hair dryer.
Contact BIOFLEX
Service.
®
MN 421.012 Rev 3
31