Idiomas disponibles
Idiomas disponibles
Initiating Therapy
Controller Unit
Face
Shoulder
Elbow
Wrist
Hand
Foot
Timer
Power
Stop Start/
Button
Treatment Array
Power LED
Top View of Treatment Array
28
MN 421.012 Rev 3
Neck
Upper Back
Lower Back
Hip
Knee
Ankle
Treatment Stage
Select
Pause
Stage
Strap Anchor Points
Treatment
LEDs
Bottom View of Treatment Array
Application Of Treatment
Step 1
Place Array on the area to be treated. Apply to dermis (skin)
to obtain maximum transmission of light into the tissues. The
Treatment Array may be held firmly in place either with the
straps provided or manually.
Step 2
Press the power button to turn the system on or off. You will
hear an audible double beep and the power button will turn
blue after it is turned on.
Step 3
Press the circle on the Controller Unit that corresponds to the
area of the body to be treated (e.g., face, knee, etc.). When
selected, the circle will turn blue.
Step 4
The Treatment Stage of the BIOFLEX
Stage 1 (recommended for at least the first five treatments or
longer). Press the button again for Stage 1 - 4, as required.
Step 5
Press the Start/Pause button to begin the treatment. There
will be an audible beep and the countdown timer will start.
The length of each treatment varies depending on the area
selected. For optimal results, run the treatment to completion
(until the timer signals the termination).
If you need to stop or pause your treatment for any reason,
press the Start/Pause button. Pressing the Start/Pause button
again will resume your treatment.
Step 6
Press the Stop button at any time to pause the treatment.
Press Stop twice to cancel the treatment.
120 automatically selects
®
29
MN 421.012 Rev 3
