Corghi Artiglio 50 Manual De Uso página 55

10 Bead breaker unit disengagement control (fig. 12).
11 Wheel rest and centring unit.
12 Bead breaker unit control console (see fig.13).
13 Bead breaker disc.
14 Tilting bead breaker unit.
15 Pedal control unit.
16 Grease container.
17 Wheel lift control.
18 Filter Regulator + Lubricator unit (unit which regulates, filters, dehumidifies and
lubricates the compressed air supplied), (fig.7).
19 Dataplate.
20 Relief valve (fig. 5a).
21 Air tank (fig. 5a).
22 Doyfe union.
WARNING
For technical characteristics, warning notices, maintenance and all other informa-
tion regarding the air tank, refer to the air tank operator's manual supplied with the
machine documentation.
DESCRIPTION OF CONTROLS
- see figure 9 -
A - Arm swing control and wheel pressure display panel
A1 - Air pressure display gauge
Pressure gauge which displays the air pressure set with the pedal E1.
Displays the tyre pressure in bar.
A2 - Tool arm swing control
The control swings the tool arm into the working position and locks it there.
The same control releases the tool arm and swings it outwards.
GB
A3 - Deflation button
Press this button to discharge excess air from inside the tyre. This button can only be
used during inflation of the tyre with the Doyfe union of the inflation line connected to
the stem of the valve.
Operator's manual Artiglio 50 55