Corghi Artiglio 50 Manual De Uso página 54

SPECIFIED CONDITIONS OF USE
ARTIGLIO 50 tyre changers are designed solely for mounting and demounting tyres using
the tools with which they are equipped as described in this manual.
WARNING
Any use other than that described is regarded as unsuitable and rash.
The machines are equipped with an inflation system independent of the other functions
described above. Take great care when using it (read the INFLATION section).
WARNING
The use of equipment other than genuine CORGHI accessories when operating the
machine is not recommended.
WARNING
Keep hands well away from moving parts of the machine.
WARNING
To stop the machine in an emergency:
- disconnect the power supply plug;
- cut off the compressed air supply network by disconnecting the shut-off valve (snap
coupling).
MAIN OPERATING PARTS
WARNING
Learn all about your machine: the best way to prevent accidents and obtain top per-
formance is to get to know exactly how it works. Learn the function and layout of all
the controls. Check carefully that each of the controls operates as it should. To avoid
any risk of accident and injury, the machine must be installed and operated correctly,
and serviced regularly.
The machine's main operating parts are shown in fig. 5.
1 Body
2 Wheel lift (optional accessory) - F fig.9 - .
3 Motor guard.
4 Centring handle (device for clamping the wheel to the turntable).
5 Mobile mount/demount head.
6 Side-swinging tool head arm.
7 Demount tool control cylinder.
7a Tool head descent cylinder.
8 Supporting column.
9 Panel with arm swing control and pressure gauge (fig. 9).
54
Operator's manual Artiglio 50