Idiomas disponibles
Idiomas disponibles
2
Making Measurements
Changing the default thermocouple type (U1272A only)
You can change the thermocouple type (J or K) by accessing the multimeter's
Setup.
1 Press
2 Press
3 Available options:
4 Press
Changing the default temperature unit
You can change the temperature unit (degree Celsius, Celsius/Fahrenheit,
Fahrenheit, or Fahrenheit/Celsius) by accessing the multimeter's Setup.
1 Press
2 Press
3 Press
The bead-type thermocouple probe is suitable for measuring temperatures from
–40 °C to 204 °C (399 °F) in PTFE-compatible environments. Above this
temperature range, the probe may emit toxic gas. Do not immerse this
thermocouple probe in any liquid. For best results, use a thermocouple probe
90
for more than 1 second to enter the multimeter's Setup mode.
Setup
until
to change the thermocouple type.
to save the changes. Press and hold
restarts.
for more than 1 second to enter the multimeter's Setup mode.
Setup
for more than 1 second until
display. Press
or
Setup
Available options:
–
- Temperature measured in °C.
–
- During temperature measurements, press
between °C and °F.
–
- Temperature measured in °F.
–
- During temperature measurements, press
between °F and °C.
to save the changes. Press and hold
restarts.
is shown on the secondary display. Press
or
.
to change the temperature unit.
Dual
E xit
Keysight U1271A/U1272A User's Guide
Setup
until the multimeter
Setup
is shown on the secondary
to switch
to switch
until the multimeter
Setup
or
Dual
E xit
