Idiomas disponibles
Idiomas disponibles
Figure 3-4
3 The elapsed time is shown on the secondary display. Press
– Changing the range manually will also restart the recording session.
NOTE
– If an overload is recorded, the averanging function will be stopped.
– The APO (auto power-off) function is disabled when MaxMin is enabled.
– The maximum recording time is 99.59.59 (hh.mm.ss).
4 Press
This mode is useful for capturing intermittent readings, recording minimum and
maximum readings unattended, or recording readings while equipment operation
keeps you from observing the multimeter display.
The true average value displayed is the arithmetic mean of all readings taken
since the start of recording. The average reading is useful for smoothing out
unstable inputs, calculating power consumption, or estimating the percentage of
time a circuit is active.
Keysight U1271A/U1272A User's Guide
MaxMin display
recording session.
shown in place of the average value.
recording exceeds the maximum time.
for more than 1 second to disable the MaxMin function.
Dual
E xit
Multimeter Features
to restart the
Dual
E xit
is shown if the
3
is
113
