Idiomas disponibles
Idiomas disponibles
2
Making Measurements
Measuring Temperature
Do not connect the thermocouple to electrically live circuits. Doing so will
WARNING
potentially cause fire or electric shock.
Do not bend the thermocouple leads at sharp angles. Repeated bending
CAUTION
over a period of time can break the leads.
The multimeter uses a type-K (default setting) temperature probe for measuring
temperature.
1 To measure temperature, position the rotary switch to
2 Probe the test points and read the display. The primary display normally shows
Figure 2-27
Press
change the temperature unit to switch between °C and °F or °F and °C). See
"Changing the default temperature unit"
88
once. Set up your multimeter as shown in
temperature or the message
message may be due to a broken (open) probe or because no probe is installed
into the input jacks of the multimeter.
Temperature display
to change the temperature units between °C or °F (you must first
Figure
2-29.
(open thermocouple). The open thermocouple
on page 90 for more information.
Keysight U1271A/U1272A User's Guide
and press
