Bosch KTS 250 Manual Original página 9

studied prior to start-up, connection and operation of
the KTS 250 and must always be observed.
---Separator---
1.5 Warranty and liability
No modifications may be carried out on our products.
Our products may only be used with genuine accesso‐
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---Separator---
1.6 Safety instructions
All the pertinent safety instructions can be found
in the separate manual for KTS 250". These in‐
structions must be carefully studied prior to
start-up, connection and operation of the
KTS 250 and must always be observed.
---Separator---
1.7 Other applicable documents
• 1 689 979 922 – Important information and safety in‐
structions for Bosch Test equipment
• 1 689 989 393 – Privacy, data security, wireless con‐
nections
---
2. Standards and guidelines
2.1 ---Separator--- EMC
The KTS 250 satisfies the criteria of EMC directive
2014/30/EC.
The KTS 250 is a class/category-A product according to
EN 61 326-1. The KTS 250 may cause high-frequency
household interference (radio interference) so that in‐
terference suppression may be necessary. In such ca‐
ses, the operator may be required to take appropriate
action.
---Separator---
2.2 Open-source software (OSS)
For an overview of the open-source software licenses
for the KTS 250, see "Settings >> Legal notes".
---Separator---
3. Product description
3.1 --- Intended use
The KTS 250 is a battery-powered diagnostic device for
workshops that can be used for control unit diagnosis.
It is prohibited to pass it on to end consumers.
---Separator---
Robert Bosch GmbH
3.2 Foreseeable misuse
Misuse ( ) with corresponding intended use ( ):
 KTS 250 is passed on to end consumers.
 KTS 250 may only be operated by trained workshop
personnel.
---
 KTS 250 is operated by the driver of a vehicle while
driving.
 KTS 250 may only be used while driving if it is oper‐
ated by a trained and instructed passenger.
---
 KTS 250 is used to reset the OBD fault memory of
vehicles without performing long-term remedies (e.g.
replacing components or replenishing consumables).
 KTS 250 Use only to reset the OBD fault memory of
vehicles after long-term remedies were per‐
formed (e.g. replacing components or replenishing
consumables).
---
3.3 Scope of delivery
Denomination
KTS 250
Case
Power supply unit
USB connecting cable
OBD connection cable
WLAN USB adapter
Original instructions and related documents
---
The order numbers are not part numbers. The or‐
der numbers are used to identify the items inclu‐
ded in the scope of delivery. Components that
can be ordered are identified as spare parts or
wearing parts.
---
KTS 250 | 9 | en
Order number
–
–
1 687 023 736
1 684 465 491
1 684 465 756 /
1 684 465 882
–
–
1 689 989 370 | 2022-01-08