Idiomas disponibles
Idiomas disponibles
12 – Display options
It is possible to control all functions and parameters of the machine through the main
display.
Please find below information about each one of them.
A
B
ATTENTION!
Please use blind filter on each group where cleaning process is being applied.
Depending on cleaning frequency, please consider using cleaning product ref.
V.8401 or V.8402, following instructions specified on it. This process dissolves the
dust contained in the blind filter, cleaning the ducts and the solenoid valve, as
well as the showers and diffusers of the group. You can repeat this process as
many times as necessary and until clean water appears through the discharge
of the group.
Once finished, remove the filter holder and operate the group for 30 seconds,
passing clean water.
ATTENTION!
It is possible to stop the process pressing any of the keys of the control panel
belonging to the coffee group being cleaned.
20
ENERGY SAVING OPTIONS. It is possible to switch ON or OFF each
one of the coffee groups as well as the boiler, and set the time after
which they may get into ECO mode, and also its stand-by temperature
after that.
Switch ON or OFF coffee
groups
Coffee groups ECO
temperature setting
Coffee groups ECO mode
starting time
GROUP CLEANING. It allows to carry on cleaning process of each
one of the coffee groups. Cleaning process consist of 10 consecutive
rinsing of 10 seconds, with a 3 second delay between them.
Switch ON or OFF boiler
Boiler ECO temperature
setting
Boiler ECO mode starting
time
