Attention! If you have used the steam or water service for a long period without
interruption and observe that the output pressure drops, wait a few moments for the
boiler to recover. The optimum pressure is 1 / 1,5 bar.
IMPORTANT!
After each use it is advisable to let steam out for 5 seconds to clean
the duct and prevent it from becoming clogged. To clean the absorption
holes (A) you can use a clip. Make sure that the tube is free of obstacles.
11 – Preparation of hot water
Put a cup or container under the water outlet. Operate the hot water switch (8, short or
large selection) to obtain water.
Both selections are set by time and will stop automatically after reaching the setting. If
you want to modify it, please follow section 9.
19