Idiomas disponibles
Idiomas disponibles
55
Empty the drip tray after preparation so that it cannot over昀氀ow if you prepare another
drink.
14. Switch the device to standby mode by touching the 昀椀eld
昀椀eld
.
If there is no more action, the device automatically switches to standby mode after approx.
30 minutes. All 昀椀elds go out, apart from the 昀椀eld
the 昀椀eld
.
Dispensing Hot Water
1. Fill the water tank (6) (see the "Preparation of the Device" chapter – "Filling the Water Tank").
2. Direct the steam nozzle (9) towards the drip tray (13) or into an empty vessel.
3. Make sure that the steam power control (8) is in the
4. Switch on the device by touching the 昀椀eld
The 昀椀eld
昀氀ashes slowly and the 昀椀elds
When preheating 昀椀nishes, all operating 昀椀elds and displays (apart from DESCALE (26) and
SINGLE / DOUBLE (28)) will be lit. The device is ready to operate.
Approx. 190 – 240 ml of hot water are dispensed. Make sure that the vessel is large enough!
5. Move the steam power control (8) to position
昀氀ashes.
6. Turn the steam power control to the
been dispensed.
7. Switch the device to standby mode by touching the 昀椀eld
昀椀eld
.
If there is no more action, the device automatically switches to standby mode after approx.
30 minutes. All 昀椀elds go out, apart from the 昀椀eld
the 昀椀eld
.
Recipes for Speciality Coffees
Cappuccino
Cappuccino is normally made from one third espresso, one third hot milk and one third milk froth.
The cup should be thoroughly preheated as the drink is prepared in several steps.
1. First prepare the espresso (see the "Preparation" chapter – "Making Espresso").
2. Then place the cup down on the hotplate (7) so that the espresso remains as hot as possible.
. All 昀椀elds go out, apart from the
. To switch the device on again, touch
(Off) position.
(35). The device switches to preheating mode.
(33) light up.
(34) and
(Hot water). The control lamp
position once the desired quantity of hot water has
. All 昀椀elds go out, apart from the
. To switch the device on again, touch
EN
(25)
