Idiomas disponibles
Idiomas disponibles
safety equipment, such as dust masks that are
specially designed to filter out microscopic par
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4
Intended use
The power tool is a stationary unit designed for
sawing blocks of wood, plastic, non-ferrous
metals and similar materials. Do not use it to
process other materials, in particular steel,
concrete and mineral materials.
When fitted with the special saw blades offered
by Festool, these machines can also be used for
sawing unhardened ferrous metal and non-fer
rous metal.
Materials containing asbestos must NOT be
processed.
Do not use cutting or abrasive wheels.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
4.1
Saw blades
Only use saw blades with the following dimen
sions:
–
Saw blades according to EN 847-1
–
Saw blade diameter 8-1/2" (216 mm)
–
Cutting width 3/32" (2.3 mm)
–
Locating bore 1-3/16" (30 mm)
–
Standard blade thickness 1/16" (1.6 mm)
–
Suitable for speeds of up to 5000 min
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
5
Technical data
Cordless compound
mitre saw
Motor voltage
Speed (idle) 1 x 18 V
Speed (idle) 2 x 18 V
Max. speed
[1]
Suitable battery packs
[1] Max. speed in the event of faulty electronics.
-1
KSC 60 EB
18 - 2 x 18 V
1300–1800 min
-1
1300–3500 min
-1
5000 min
-1
Festool series
BP 18 ≥ 4 Ah
Cordless compound
mitre saw
Max. mitre angle
Max. bevel angle
Weight excl. battery
pack
6
Functional description
[1-1]
Switch-on lock
[1-2]
On/off switch
[1-3]
Safety button
[1-4]
Handle
[1-5]
Lever for groove depth limit
[1-6]
Rotary knob for slide locking device
[1-7]
Lever for transport locking device
[1-8]
Spindle stop
[1-9]
Stop ruler (both sides)
[1-10] Extension table (both sides)
[1-11] Rotary knobs for securing the exten
sion table (both sides)
[1-12] Angle display for mitre cuts
[1-13] Lever for locking the mitre angle
[1-14] Rotary knob for securing the rotary
base
[1-15] Rotary base
[1-16] Pendulum guard
[2-1]
On/off switch for spot lighting
[2-2]
Button to remove battery pack
[2-3]
FSZ120 fastening clamp
[2-4]
Bevel holder for clamping the bevel
[2-5]
Bevel angle display
[2-6]
Star handle for securing the bevel an
gle
[2-7]
Carrying handle
[2-8]
Key storage box for the hex key
[2-9]
Extractor connector
[2-10] Battery pack capacity indicator
[2-11] Adjusting wheel for setting the speed
English
KSC 60 EB
60° left/right
47/46° left/right
37.7 lb
13
