Blind Rivet Nut Is Not Unscrewed; Set Blind Rivet Nut Is Not Completely Set; Led Lights Flashing - Gesipa FireBird Pro S GE Manual De Instrucciones

3.2

Blind rivet nut is not unscrewed

Possible causes
Nut thread deformed/destroyed due to excessive
setting stroke (rapid flashing)
3.3

Set blind rivet nut is not completely set

Possible causes
Setting stroke too small
Nut is incompletely fitted; consequently, the selec-
ted setting stroke is not achieved.
Selected setting stroke is not achieved
Battery is discharged
3.4

LED lights flashing

Possible causes
Battery is discharged
Overload during extraction process (slow flashing)
Nut cannot be unscrewed. Nut thread deformed/
destroyed due to excessive setting stroke (rapid
flashing)
3 beeps and flashing LED lights for 10 seconds:
The battery needs to be changed soon (about 20% battery charge remaining).
6 beeps and flashing LED lights for 10 seconds after every setting sequence: Change the
battery after a few more riveting sequences to guarantee safe and secure riveting sequences
(approx. 10% battery remaining).
9 beeps and flashing LED lights for 10 seconds: The next riveting sequence cannot be reliably
carried out. The tool is switched off. Change the battery.
Corrective measures
Remove nut using hexagon screwdriver (section
5; see figure 5);
Reduce setting stroke (section 2.3)
Corrective measures
Increase setting stroke in small steps (section 2.3)
Fit nut correctly (section 2.4)
Tool's setting force is insufficient; observe the
working range (section 1.1)
Charge the battery
Corrective measures
Charge the battery
Observe the working range (section 1.1)
Remove nut using hexagon screwdriver (section
5; see figure 5);
Reduce setting stroke (section 2.3)
GB
25