General Information - WIKA ACS-10 Manual De Instrucciones

1. General information

1. General information
The German language version of this document is the original operating instructions
■
for model ACS-10, all other languages are translations of the original operating
instructions.
The calibration system for SF₆ density measuring instruments described in the
■
operating instructions has been designed and manufactured using state-of-the-
art technology. All components are subject to stringent quality and environmental
EN
criteria during production. Our management systems are certified to ISO 9001 and
ISO 14001.
These operating instructions contain important information on handling the
■
instrument. Working safely requires that all safety instructions and work instructions
are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
50
www.wika.de / www.wika.com
SP 60.15
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
WIKA Betriebsanleitung Kalibriersystem, Typ ACS-10