inosmart INO-FBE 10 Manual De Instrucciones página 20

SMALL
10
20
40
As long as the oven door is open, the
indication "CLOS DOOR" remains in the display.
Close the oven door after detergent is loaded.
The washing program selected will
automatically start. The display shows the letters
representing the selected washing program, as
well as the washing time.
WARNING: Regardless of the washing program
selected, the
background work
conditions before washing is started. Meanwhile,
letters representing the selected washing program
and washing time in hour and minute are
displayed.
Ideal washing conditions are set up as follows:

First the discharge valve is closed. This
procedure takes around 1 minute.

Cabin temperature of the oven should be
60°C. If actual cabin temperature is above
60°C, cabin fans start during which the
MIDDLE LOTS
oven automatically starts
to meet ideal

Cancelling the Washing Process
washing and switch off the oven.
control panel. The display shows the message
"WASH END".
cancel washing. To prevent any detergent residue,
the oven starts flushing for 30 minutes and then
gets ready for cooking.
If you do not press the rotary switch within 10
seconds following the indication of the message
"YKMA IPTL", washing procedure is resumed.
WARNING: To prevent damage to the electrical
installation, do not use direct or highly
pressurized water for cleaning.
a
10. MAINTENANCE
washing
 The user should not attempt to repair or replace
any device part or component.
 In case a dangerous situation is observed in the
device, first cut the power connections, and then
call the authorized service. Intervention in the
device by unauthorized persons should be
avoided.
11. TROUBLESHOOTING
20
indication "KAPI AC" appears on the
display. Meanwhile, the cooling LED
lights, indicating that cooling process is
in progress. If cabin temperature is below
60°C, burners start to bring cabin
temperature to 60°C.
Water temperature in steam generator
should be around 50-55°C. If water
temperature is above 55°C, cold water is
fed to the steam generator to cool down.
Otherwise, the steam generator burner
starts to increase water temperature above
55°C.
Press the on/off button to cancel
Press the same button to open the
Meanwhile, press the rotary switch to