Cleaning/Sanitizing Procedure; Cleaning Procedure - Manitowoc 820C Serie Manual De Instalación, Operación Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance

Cleaning/Sanitizing Procedure

,
Use only Manitowoc approved Ice Machine Cleaner and
Sanitizer for this application (Manitowoc Cleaner part
number 94-0546-3 and Manitowoc Sanitizer part number
94-0565-3). It is a violation of Federal law to use these
solutions in a manner inconsistent with their labeling.
Read and understand all labels printed on bottles before
use.

CLEANING PROCEDURE

,
Do not mix Cleaner and Sanitizer solutions together. It
is a violation of Federal law to use these solutions in a
manner inconsistent with their labeling.
n
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or Sanitizer.
Ice machine cleaner is used to remove lime scale and mineral
deposits. Ice machine sanitizer disinfects and removes algae
and slime.
NOTE: Although not required and dependent on your
installation, removing the ice machine top cover may allow
easier access.
Step 1
Open the front door to access the evaporator
compartment. Ice must not be on the evaporator during the
clean/sanitize cycle. Follow one of the methods below:
• Press the power switch at the end of a harvest cycle after
ice falls from the evaporator(s).
• Press the power switch and allow the ice to melt.
,
Never use anything to force ice from the evaporator.
Damage may result.
Step 2
Remove all ice from the bin/dispenser.
40
Caution
Caution
Warning
Caution
Step 3
Press the Cleaning button. Water will flow through
the water dump valve and down the drain. Wait until the
water trough refills and the display indicates Add Chemical
(approximately 1 minute), then add the proper amount of ice
machine cleaner.
Model
I0300/I0320/I0520
I0450/I0500/I0600/I0606
I0686C/IB0690C/I0850/IB0980C
IB0896C/I0870C/I0876C
I0906/I0976C/I1076C
I1000/IB1090C/IB1096C
I1100/I1106/I1070C/I1176C
I1200
IB0690C/IB0890C/IB1090C
I1400/I1406/I1470C/I1476C
I1800/I1806/I1870C/I1876C
I2170C/I2176C
I3300/I3070C
Step 4
Wait until the clean cycle is complete
(approximately *24 minutes). Then disconnect power to the
ice machine (and dispenser when used).
n
Disconnect the electric power to the ice machine at the
electric service switch box.
Step 5
Remove parts for cleaning.
Please refer to the proper parts removal for your ice
machine. Continue with step 6 when the parts have been
removed.
Single Evaporator Ice Machines - page 42
Multiple Evaporator Ice Machines - page 43
Part Number: 000013325 Rev 02 6/17
Section 4
Amount of Cleaner
90 ml (3 oz)
150 ml (5 oz)
150 ml (5 oz)
265 ml (9 oz)
475 ml (16 oz)
Warning
Tabla de contenido

Solución de problemas

loading

Tabla de contenido