Remote Condenser And Remote Condensing Unit Refrigeration System Installation - Manitowoc 820C Serie Manual De Instalación, Operación Y Mantenimiento

Installation

Remote Condenser and Remote Condensing Unit Refrigeration System Installation

Each ice machine head section ships from the factory with a refrigerant charge appropriate for the entire system operation. The
serial tag on the ice machine indicates the refrigerant charge.
QuietQube Models
Remote
QuietQube®
Single Circuit
Ice Machine
Condenser
I0680C
ICVD0695
IB690C
IB0686C
ICVD0696
IB0696C
I0870C
ICVD0895
IB0890C
IB0890C
ICVD0996
I0976C
I1070C ICVD1095
IB1090C ICVD1195
I1176C ICVD1195
I1470C
ICVD1495
I1476C ICVD1495
I1870C ICVD1895
I2170C ICVD2095
I2176C ICVD2096
I3070C
ICVD3095
Suction
*Line Set Liquid Line
Line
16 mm
RC 26/36/56
5/8 inch
19 mm
RC 25/35/55
3/4 inch
19 mm
RC 28/38/58
3/4 inch
Two Lines
RC 29/39/59 19 mm
3/4 inch
n
Installation of a QuietQube® Condensing Unit may
require the use of special equipment for placement.
Trained and qualified personnel are required for proper
rigging and lifting. Holes are provided on the corners of
the condensing unit to allow the use of lifting shackles.
18
Additional
Refrigerant
Charge for 15
Line Set*
to 30 Meter
Line Sets
(50' - 100')
680 g - 1.5 lbs
680 g - 1.5 lbs
RC-26
1814 g - 4 lbs
RC-36
907 g - 2 lbs
RC-56
907 g - 2 lbs
907 g - 2 lbs
907 g - 2 lbs
907 g - 2 lbs
RC-25 907 g - 2 lbs
907 g - 2 lbs
RC-35
RC-55 907 g - 2 lbs
RC-28 1814 g - 4 lbs
RC-38
1814 g - 4 lbs
RC-58
RC-29/39/59 1361 g - 3 lbs
Minimum Insulation
Thickness
10 mm 13 mm (1/2") Suction Line
3/8 inch 7 mm (1/4") Liquid Line
13 mm 13 mm (1/2") Suction Line
1/2 inch 7 mm (1/4") Liquid Line
16 mm 13 mm (1/2") Suction Line
5/8 inch 7 mm (1/4") Liquid Line
One Line
19 mm (3/4") Suction Line
16 mm
7 mm (1/4") Liquid Line
5/8 inch
Warning
Important

Manitowoc remote systems are only approved and
warranted as a complete new package. Warranty on the
refrigeration system will be void if a new ice machine
head section is connected to pre-existing (used) tubing or
condensing units or vice versa.
Remote Condenser Models
Remote
Remote
Condenser Ice
Condenser
Machine
I0590N JC0495
I0690N JC0895
I0890N JC0895
I0996N JC0995
I1090N
JC0995
I1196N
I1490N JC1395
I1890N JC1395
Line Set Discharge Line
RT 20/35/50 12.7 mm
1/2 inch
RL 20/35/50 12.7 mm
1/2 inch
n
Potential Personal Injury Situation
The ice machine head section contains the refrigerant
charge. Installation and brazing of the line sets must
be performed by a properly trained and EPA certified
refrigeration technician aware of the dangers of dealing
with refrigerant charged equipment.
Part Number: 000013325 Rev 02 6/17
Section 2
Additional Amount of
Refrigerant to Be Added to
Nameplate Charge for 15 to 30
Meter Line Sets (50'-100')
680 g - 1.5 lbs
680 g - 1.5 lbs
907 g - 2 lbs
907 g - 2 lbs
907 g - 2 lbs
907 g - 2 lbs
907 g - 2 lbs
Liquid Line Model
7.9 mm I0590/I0690
5/16 inch I0890/I0996/
I1090/I1196
9.5 mm I1490/I1890
3/8 inch
Warning