Sanitizing Procedure - Manitowoc 820C Serie Manual De Instalación, Operación Y Mantenimiento

Section 4
Step 6 Mix a solution of cleaner and lukewarm water.
Depending upon the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in the
table below to mix enough solution to thoroughly clean all
parts.
Solution Type
Cleaner 4 L (1 gal)
Step 7 Use half of the cleaner/water mixture to clean all
components. The cleaner solution will foam when it contacts
lime scale and mineral deposits; once the foaming stops, use
a soft-bristle nylon brush, sponge or cloth (NOT a wire brush)
to carefully clean the parts. Soak parts for 5 minutes (15 - 20
minutes for heavily scaled parts). Rinse all components with
clean water.
Step 8 While components are soaking, use half of the
cleaner/water solution to clean all foodzone surfaces of the
ice machine and bin (or dispenser). Use a nylon brush or
cloth to thoroughly clean the following ice machine areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including top, bottom and sides
• Bin or dispenser
Rinse all areas thoroughly with clean water.

SANITIZING PROCEDURE

Step 9 Mix a solution of sanitizer and lukewarm water.
Solution Type
Sanitizer
Step 10 Use half of the sanitizer/water solution to sanitize
all removed components. Use a spray bottle to liberally apply
the solution to all surfaces of the removed parts or soak the
removed parts in the sanitizer/water solution. Do not rinse
parts after sanitizing.
Part Number: 000013325 Rev 02 6/17
Water Mixed With
475 ml (16 oz) cleaner
Water Mixed With
12 L (3 gal) 60 ml (2 oz) sanitizer
Step 11 Use half of the sanitizer/water solution to sanitize
all foodzone surfaces of the ice machine and bin (or
dispenser). Use a spray bottle to liberally apply the solution.
When sanitizing, pay particular attention to the following
areas:
• Side walls
• Base (area above water trough)
• Evaporator plastic parts - including top, bottom and sides
• Bin or dispenser
Do not rinse the sanitized areas.
Step 12 Replace all removed components.
Step 13 Wait 20 minutes.
Step 14 Reapply power to the ice machine and perform the
following key strokes.
• Press Cleaning button
• Press Checkmark
• Press Checkmark to select Auto Ice - on
Step 15 Wait until the water trough refills and the display
indicates to add solution (approximately 1 minute). Add the
proper amount of Manitowoc Ice Machine Sanitizer to the
water trough by pouring between the water curtain and
evaporator.
Model
I0300/I0320/I0520
I0450/I0500/I0600/I0606
I0686C/IB0690C/I0850/IB0980C
IB0896C/I0870C/I0876C
I0906/I0976C
I1076C/I1000/IB1090C
I1100/I1106/I1070C/I1176C
I1200
IB1090C/IB1096C
I1400/I1406C/I1800/I1806C
I1470C/I1476C/I1870C/I1876C
I2170C/I2176C
I3300/I3070C
Step 16 Close and secure the front door. The ice machine
will automatically start ice making after the sanitize cycle is
complete (approximately 24 minutes).
Maintenance
Amount of Sanitizer
90 ml (3 oz)
90 ml (3 oz)
104 ml (3.5 oz)
180 ml (6 oz)
355 ml (12 oz)
740 ml (25 oz)
41