Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Ice Deflector
An ice deflector is required when the ice machine is installed
on a bin. An ice deflector is not required when the ice
machine is installed on a dispenser.
Bin Level Accessory Kit
The bin level accessory connects to the circuit board and
allows bin level adjustment of Indigo ice machines on B
model bins. Installation instructions are included with the
accessory. A bin level sensor is required to set a lower level
of ice in the bin.
Bin Installation
• All ice machines installed on a bin require an ice
deflector.
• Manitowoc bins have a deflector installed and require
no modifications when used with a forward-facing
evaporator.
• Ice machines with multiple evaporators require a
deflector kit.
• Align sides and back of ice machine with sides and back
of bin when placing ice machine on bin.
Control Panel Bezel
The ice machine ships with two bezels:
• The standard bezel allows the display screen to be viewed
and the menu, arrows and check mark buttons can be
accessed.
• The key guard bezel allows the display screen to be
viewed and covers all buttons to prevent unauthorized
settings from being entered. The ice machine door must
be opened to access the control panel.
To change the bezel, open the ice machine door, remove the
two screws securing the bezel and slide the bezel to the right
while lifting forward.
An optional cover that completely hides the display is a sales
kit, and is available through your local distributor or service
company.
Part Number: 000013325 Rev 02 6/17
Section 1
General Information
Top Air Discharge Kit
The top air discharge kit can be used on select ice machine
models. This kit directs warm exhaust air upward rather than
out the side panels.
LuminIce® II
The LuminIce® growth inhibitor recirculates the air in the ice
machine foodzone over a UV bulb. This process will inhibit
the growth of common micro-organisms on all exposed
foodzone surfaces.
• LuminIce® bulbs require replacement on a yearly basis.
• The control board can be set to automatically display a
reminder after 12 months.
• A remote light is available for reminder indication.
NOTE: LuminIce® and LuminIce® II bulbs are not
interchangeable; verify your model before ordering a
replacement bulb.
Cleanup Procedure for Accidental Bulb Breakage
The cleanup procedure is identical to the procedure used
to clean up compact fluorescent (CFL) or fluorescent tube
lights. These lights contain a small amount of mercury sealed
within a glass tube. Breaking these types of lights will release
mercury and mercury vapor. The broken bulb can continue to
release mercury vapor until it is cleaned up and removed.
The latest EPA procedures can be viewed on their website at
www.epa.gov/cfl/cflcleanup.html.
7
Tabla de contenido
Solución de problemas
