Maintenance Schedule - Husqvarna FS 600 E Manual De Usuario

Maintenance schedule

Maintenance
Clean the external surfaces of the product with water. Refer to
page 23 .
Do a general inspection. Refer to
Do a check of the drive belt. If it is necessary, adjust the tension of the drive belt. Refer to
To adjust the tension of the drive belt on page 24
Do a check of the machine stop button. Refer to
on page 10 .
Do a check of the ON button and OFF button. Refer to
and OFF button on page 9 .
Do a check of the ground fault circuit interrupter. Refer to
fault circuit interrupter on page 11 .
Do a check of the water flow. If the water flow is not sufficient, do a check of the water
filter. If it is necessary, clean the water filter. Refer to
23 .
Do a check of the blade guards. Refer to
Do a check of the cutting blade. Refer to
Lubricate the bushings and the lever for cutting depth adjustment. Refer to
the product on page 24 .
Lubricate the nut at the drive belt plate and the axle. Refer to
page 24 .
To clean the product
WARNING:
When you clean the product, dirt and
harmful material can eject from the product.
CAUTION:
decreases the performance of the product
and can cause the motor to become too hot.
• Let the product become cool before you clean it.
• Do not clean electrical components with water.
• Use a weak cleaning agent. Put on protective gloves
to prevent skin irritation.
• Always clean all the equipment at the end of the
work day. Do not use a high-pressure washer to
clean the product.
• Remove blockage from all air openings.
To clean the water filter
CAUTION:
decreases the water flow to the cutting blade
1620 - 003 - 28.02.2022
To do a general inspection on page 24 .
To do a check of the machine stop button
To do a check of the blade guard on page 11 .
Cutting blades on page 12 .
Use protective glasses.
A blocked air intake
A blocked water filter
To clean the product on
To do a check of the ON button
To do a check of the ground
To clean the water filter on page
To lubricate
To lubricate the product on
and can cause the cutting blade to become
too hot.
Daily Monthly
X
X
X
X
X
X
X
X
X
X
X
23