Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GTS 18V-216 Professional Manual Original

44 | English
– Place all loose components of the tool in their storage
compartments on the housing (see the following table).
Tool element
Storage compartment
Turn around, suspend from below
Parallel guide (5)
in the guide rails and secure the
clamping handle (41)
Push stick (12) Place in the storage compartment
(67)
Protective cover (3) Place in the recess on the bracket
(11) and secure using the clamping
lever (39)
Hex key (10) Place in the storage compartment
(68)
Ring spanner (9) Place in the storage compartment
(69)
Angle guide (2) Place in the storage compartment
(7)
Additional parallel Push into the groove at the back of
guide (43) the parallel guide (5) and tighten
using the wing bolts
Transporting the power tool
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Before transporting the power tool, the following steps must
be carried out:
– Bring the power tool into the transport position (see
"Transport position", page 40).
– Remove all accessories that cannot be securely fitted to
the power tool.
If possible, transport unused saw blades in a closed con-
tainer.
– Slide the saw table expansion (6) in fully and push the
clamping handle (13) downwards to secure it in place.
– Use the carrying handles (29) to lift or transport the tool.
Only use the transport devices to transport the power
u
tool and never the protective devices.

Maintenance and Service

Maintenance and Cleaning

Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
Cleaning
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
1 609 92A 7NP | (27.04.2022)
Noise reduction measures
Measures implemented by the manufacturer:
– Soft start
– Provided with a saw blade specially developed for noise
reduction
Measures implemented by the operator:
– Low-vibration mounting on a stable work surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of the saw blade and power tool
Accessories
GTA 560 saw stand
GTA 60 W saw stand
Dust bag
Saw blades for wood and fibreboard, panels and strips
for 3 601 M44 0B0 :
Standard for Wood
216 x 2.0/1.4 x 25.4 mm, 24 teeth
for 3 601 M44 000 , 3 601 M44 0K0 3 601 M44 040 :
Standard for Wood
216 x 2.0/1.4 x 30 mm, 48 teeth
Expert for Wood
216 x 1.7/1.2 x 30 mm, 24 teeth
216 x 1.7/1.2 x 30 mm, 48 teeth
Saw blades for aluminium
Expert for Aluminium
216 x 2.0/1.4 x 30 mm, 66 teeth
Saw blades for laminated panels
Expert for Laminated Panel
216 x 2.1/1.4 x 30 mm, 66 teeth

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Article number
0 601 B22 700
0 601 B12 000
1 600 A01 ZE5
2 608 841 163
2 608 837 726
2 608 644 520
2 608 644 521
2 608 644 544
2 608 644 552
Bosch Power Tools