Getting To Know The Machine - GGP ITALY B 26 J Traducción Del Manual Original

IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE.
EN
Keep for future reference
TABLE OF CONTENTS

Getting to know the machine ......................... 1

Safety regulations .......................................... 2
Operating instructions .................................... 5
1. Machine assembly ................................... 5
2. Preparing to work ..................................... 7
3. Using the machine ................................... 8
4. Operating modes and work techniques ..... 9
5. Routine maintenance ............................. 10
6. Extraordinary maintenance ................... 12
7. Diagnostics ............................................ 12
HOW TO READ THE MANUAL
Certain paragraphs in the manual contain par-
ticularly significant information and are marked
with various levels of highlighting with the follow-
ing meaning:
NOTE or
IMPORTANT These give details or further infor-
mation on what has already been said, and aim
to prevent damage to the machine or cause other
damage.
WARNING! Non-observance will result in
the risk of injury to oneself or others.
DANGER! Non-observance will result in
the risk of serious injury or death to oneself
or others.
GETTING TO KNOW THE MACHINE
NOTE - The images corresponding to the ref-
erences are found on page ii of this manual.
DESCRIPTION OF THE MACHINE
AND ITS RANGE OF USE
This machine is a garden tool, and precisely a
portable brush cutter/grass edge trimmer with
combustion engine for home use.
The machine is essentially composed of an en-
gine which, employing a transmission shaft en-
closed in a tube and an angle transmission,
drives a cutting device that is configured in vari-
ous ways for carrying out different functions
The operator is able to sustain the machine with
the aid of a harness and can operate the main
controls, always keeping a safe distance from the cutting device.
All manuals and user guides at all-guides.com
Intended use
This machine was designed and manufactured
for:
- c utting grass and non-woody vegetation, us-
- c utting tall grass, dry branches, twigs and
User types
This machine is intended for use by consumers,
i.e. non-professional operators. The machine is
intended for "DIY" use only.
Improper use
Any other use differing from the above men-
tioned ones could be hazardous and harm peo-
ple and/or damage things. Examples of improper
use may include, but are not limited to:
- u sing the machine for sweeping;
- t rimming hedges or other jobs in which the cut-
- p runing trees;
- u sing the machine with the cutting device
- u se of the machine for cutting non-plant ma-
- u se of the machine by more than one person.
IDENTIFICATION LABEL
AND MACHINE COMPONENTS
1. Acoustic power level
2. Conformity marking
3. Year of manufacture
4. Manufacturer's reference model
4a. Model namel
5. Serial number
6. Name and address of manufacturer
7. Emission number
8. Article code
11. Power unit
12. Drive tube
13. Cutting device
14. Cutting device guard
1
ing a nylon line (e.g. around the edges of
lawns, flowerbeds, walls, fences and small
grassy areas to tidy up the cutting done using
a mower).
woody shrubs of up to 2 cm diameter, with the
aid of metal or plastic blades.
ting device is not used on ground level;
above the operator's belt level;
terial;
a. 3-point blade
b. Cutting line head