Maintenance Interval - Steinberg Systems SBS-AC-2300 Manual De Instrucciones

d) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e) Do not spray the unit with a stream of water or immerse it in water.
f) Make sure that no water enters through the ventilation openings in the casing.
g) Clean the ventilation openings with a brush and compressed air.
h) Perform regular inspections of the unit checking technical fitness and any
damages.
i) Use a soft cloth for cleaning.
j) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
k) Do not clean the unit with acidic substances, medical products, thinners, fuel,
oil or other chemicals as this may damage the unit.
l) To transport the unit, cool the unit completely and empty both water tanks.

3.4.1 Maintenance interval

Type of service
Daily
Cleaning the door seal
Cleaning the chamber
Weekly
Cleaning the
trays and rack
Cleaning the clean water
drain
Water with a little soap. After washing, wipe
thoroughly with a damp, soft lint-free cloth.
When the chamber has cooled down completely,
wipe it and the door from the inside with a damp,
soft
chamber, When removed from the machine, they should be
cleaned with a special medical disinfectant and
then wiped thoroughly with a damp, lint-free cloth.
The drain filter is located at the bottom of the
filter chamber (see photos below). Unscrew it and take
apart the strainer and adapter. Cleaning it in an
ultrasonic cleaner is recommended.
Tips:
lint-free cloth.