Steinberg Systems SBS-AC-2300 Manual De Instrucciones página 40

• "PLASTIC" - single vacuum sterilization of plastic items; working
temperature 121
sterilization cycle 20 minutes; drying time 15 minutes.
Select a program by pressing the scroll buttons up / ( b or c) down,
then press the accept button (d) to confirm and start the program.
The unit has a built-in mini printer which prints out the sterilization
result.
B) Turn on the unit by setting the power switch (5) to position "I".
Then press the parameter settings menu button (a) on the
control panel to select and enter the following unit settings
submenu:
• "LANGUAGE" - menu language selection
• "Clock:..." - date and clock setting
• "SETPRINT" - printer on/off
3.3.4 Adding
If after switching the unit on and selecting the sterilization mode and
starting it up the message "EMPTY" appears on the display next to the
C ; working pressure 110 Kpa, duration of the
o
Use the up/down scroll buttons (b / c)
to select the parameter in question,
then confirm it by pressing the
parameter acceptance button (d) to
change its value using the up/down
scroll buttons (b / c) and after selecting
the desired value, confirm it again by
pressing the acceptance button (d).
"Ster.T" - time of the sterilization
•
process
• "Dry.T" - time of the drying
process
"V-COUNT" - number of vacuum
•
processes
• "BACKLIGHT" - intensity of the
backlight
distilled/demineralized water