Steinberg Systems SBS-AC-2300 Manual De Instrucciones página 36

The ambient temperature must not exceed the range of 0-55°C and ambient
humidity should not exceed 85%. Place the unit in a way that ensures good air
circulation. Maintain a minimum clearance of 10 cm from any wall of the unit, and
20 cm from the top. Keep the unit away from any hot surfaces. Always operate the
unit on a level, stable, clean, fireproof and dry surface and out of the reach of
children and persons of impaired mental, sensory and intellectual functions. Place
the unit in such a way that the mains plug can be reached at any time. Ensure that
the power supply to the unit corresponds to that specified on the identification
plate!
ASSEMBLY OF THE UNIT
After setting the unit in the designated location, connect the supplied power plug
to the unit. Plug the other end of the plug into a grounded power outlet. Place the
paper roll in the printer (use a flat, blunt tool, e.g. a screwdriver, to open it) - see
the pictures below: