Operating Your Humidifier - Vicks StarryNight V3700 Serie Manual De Uso Y Cuidado

SETTING UP YOUR HUMIDIFIER
Placement Step 1
Select a firm, level location at least 6"
(15cm) from any walls for proper airflow.
Place the humidifier on a water-resistant
surface, as water can damage furniture
and some flooring.
Kaz will not accept responsibility for property damage caused by water spillage.
Step 1
Soak Filter
Remove tank and set
aside. Remove filter from
humidifier and soak the
filter in cool water.
DO NOT wring filter.
Step 1
Scent Pad
Remove tank and locate
Scent Pad slot.
Vicks Scent Pads work with heat to gradually release soothing aromatic vapors.
One complimentary scent pad is included with your unit.
VapoPads Recommended Usage:
®
• Not recommended for infants under 10 pounds.
• For children between 10-22 pounds, DO NOT use more than 2 pads in a 24 hour period.
4
All manuals and user guides at all-guides.com
Step 2 Step 3
Remove filter tray from Fold filter flat. Insert
unit before installing the wet filter into filter tray.
wet filter. Place filter tray back
in humidifier.
Step 2 Step 3
If there is a used scent pad Insert scent pad with angled
in the slot carefully remove side facing downward into
it. Replace with a new scent the scent pad slot. You can
pad. Open VapoPad sachet use the bag as a holder
by tearing notch on pad during insertion.
bag. DO NOT touch pad with
hands. If pad is touched, do
not rub face or eyes as it
may cause irritation.
SETTING UP YOUR HUMIDIFIER (Continued)
WARNING: DO NOT rub face or eyes after touching scent pad. DO NOT put fingers in mouth
Scent Pad
after touching scent pad. Oils in the pad could act as an irritant to eyes.
WARNING: As long as your humidifier is on, the scent pad heater will also be activated. This
area can be warm to the touch.
NOTE: Replace with Vicks Scent Pads, models VSP-19/VSP-19-CAN or Vicks Sleepy Time Vapopad
VBR-5, available at most retailers or through Kaz Consumer Relations or www.vickshumidifiers.com.
INGREDIENTS:
Menthol Vapors (VSP-19 Series): Eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
Sleepy Time Vapors (VBR-5 Series): Eucalyptus Oil, Camphor, Rosemary Oil, Lavender 40/42 & Others
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by turning
counter-clockwise .
DO NOT Use Hot Water when Filling Humidifier. DO NOT ADD ESSENTIAL OILS, MEDICATIONS
OR INHALANT LIQUIDS to the Water Tank such as Vicks
could cause damage to the humidifier and void the warranty.

OPERATING YOUR HUMIDIFIER

Power
Step 1
Output
Step 1
Starry Night
Step 1
Projector
Step 2 Step 3
Fill tank with cool tap water. Once the filled water tank
has been placed on the unit
Replace tank cap. Tighten
do not move humidifier.
by turning clockwise .
Doing so could cause
Place tank back on humidifier.
leakage and spills.
VapoSteam or Kaz Inhalant. Doing so
® ®
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
DO NOT PLUG IN HUMIDIFIER WITH WET HANDS TO AVOID
ELECTRIC SHOCK.
Set fan speed to desired output:
High ( ) Max Moisture
Low ( ) Night time sound sleep mode
Turn the power switch to the on position to activate the starry
night projector
Note: Projector can be operated independently of the humidifier.
5