Operating Your Humidifier - Vicks V3700 Serie Manual De Utilización Y Mantenimiento

Ocultar thumbs Ver también para V3700 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SETTING UP YOUR HUMIDIFIER (
scent pad
Warning: do not rub face or eyes after touching scent pad. do not put fingers in mouth
after touching scent pad. oils in the pad could act as an irritant to eyes.
Warning: as long as your humidifier is on, the scent pad heater will also be activated. this
area can be warm to the touch.
ingredients: Eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
note: Replace with Vicks Scent Pads, models VSP-19/VSP-19-CAN or Vicks Sleepy Time Vapopad
VBR-5, available at most retailers or through Kaz Consumer Relations or www.kaz.com.
fill tank
Step 1
Turn tank upside-down.
Remove tank cap by turning
counter-clockwise
do not use hot Water when filling humidifier

OPERATING YOUR HUMIDIFIER

Step 1
power
output
Step 1
starry night
Step 1
projector
'
.)
cont
d
Step 2
Fill tank with cool tap water.
Replace tank cap. Tighten
.
by turning clockwise
Place tank back on humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
do not plug in humidifier with wet hands to avoid
electric shock.
Set fan speed to desired output:
high (
low (
Turn the power switch to the on position to activate the starry
night projector
Note: Projector can be operated independently of the humidifier.
.
) Max Moisture
) Night time sound sleep mode
Step 3
Once the filled water tank
has been placed on the unit
do not move humidifier.
Doing so could cause
leakage and spills.
5
Tabla de contenido
loading

Tabla de contenido