Vicks StarryNight V3700 Serie Manual De Uso Y Cuidado página 4

CHANGING YOUR FILTER
NOTE: It is recommended that all maintenance be done in the kitchen or bathroom on a water resistant surface.
Remove water tank from unit before moving.
The filter should be changed every 30 to 60 days depending on your water quality. Keep in mind, depending on your
water quality, mineral deposits can still clog or discolor the filter, affecting its life and that of the humidifier.
To change the filter:
Step 1 Step 2
Uses replacement Turn off and unplug
filter WF2. your humidifier.
Step 6
Step 5
Soak new filter in DO NOT wring filter.
cool water.
WICKING FILTER MAINTENANCE
It is recommended you change your Wicking Filter every 30-60 days depending on water quality and usage.
If you have hard water you may need to replace your filter more frequently. Change your filter if you notice:
• The filter is hard and crusty
• The filter starts to give off an odor
• Moisture output is decreased
Be sure to use only Protec Replacement filters. This humidifier takes Protec WF2 Replacement Filter. The filter is
®
Protec antimicrobially treated and helps prevent the growth and migration of mold, algae and bacteria on the filter.
To prolong the life of your Wicking Filter, turn it over each time you fill the Water Tank. This will keep the top of the
filter from drying out and will help the filter to age more evenly.
If you notice the filter getting hard, you may soak the Wicking filter in cool water to loosen mineral buildup. This will
temporarily improve the performance until a replacement filter is purchased.
DO NOT attempt to clean the Wicking Filter with vinegar or any chemical solutions. Doing so may damage the Filter.
6
All manuals and user guides at all-guides.com
Step 3 Step 4
Remove the water tank Remove filter tray from
and filter tray. unit. Discard old filter
and set filter tray aside.
Step 7 Step 8
Insert new filter into filter Replace the water tank.
tray. Place filter tray back
in humidifier.
NOTE: For best fit and
performance remove filter
tray from the humidifier
and insert presoaked
new filter.
CLEANING
Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the
proper order to avoid harmful chemical interactions.
NOTE: REMOVE FILTER BEFORE CLEANING.
Failure to remove filter during cleaning will destroy the filter
SCALE REMOVAL (Recommend this process be performed on a weekly basis)
Step 1 Step 2
Turn off and unplug Remove and empty
your humidifier. water tank.
Step 5 Step 6
Using undilluted vinegar Rinse water tank,
wipe base thoroughly. filter tray and base
thoroughly with water
to remove scale.
DISINFECTING (Recommend this process be performed on a weekly basis)
Step 1 Step 2
Turn off and unplug Remove and empty
your humidifier. water tank.
Step 3 Step 4
Remove filter and Remove Filter Tray and fill
set aside. filter tray and water tank
with undiluted vinegar and
soak for 10-15 minutes.
Step 4
Step 3
Remove filter and Fill water tank with water
set aside and bleach solution.
Dilute 1 tablespoon (TBS) Remove water tray from
of bleach in 1 gallon of unit and fill with the
cool water remaining water and
bleach solution.
Wipe base with the
same solution.
7