SETTING UP YOUR HUMIDIFIER (
WARNING: Do not rub face or eyes after touching scent pad. Do not put fingers in mouth
Scent Pad
after touching scent pad. Oils in the pad could act as an irritant to eyes.
WARNING: As long as your humidifier is on, the scent pad heater will also be
activated. This area can be warm to the touch.
NOTE: One complementary scent pad is included with your unit, replace with Vicks Scent Pads,
models VSP-19/VSP19-CAN or Vicks Sleepy Time Vapopad VBR-5, available at most retailers or
through Kaz Consumer Relations or www.kaz.com.
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by
turning counter-
clockwise
Do Not Use Hot Water when Filling Humidifier
OPERATING YOUR HUMIDIFIER
Step 1
Power
Output
Step 1
Starry Night
Step 1
Projector
'
.)
CONT
D
Step 2
Fill tank with cool
tap water.
Replace tank cap. Tighten
.
by turning clockwise
Place tank back on
humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
DO NOT plug in humidifier with wet hands to avoid electric
shock.
Set fan speed to desired output:
High (
Low (
Turn the power switch to the on position to activate the
starry night projector
Note: Projector can be operated independently of the
humidifier.
.
) Max Moisture
) Night time sound sleep mode
Step 3
Once the filled water
tank has been placed on the
unit do not move humidifier.
Doing so could cause leak-
age and spills.