Tabla de contenido
Idiomas disponibles
Idiomas disponibles
settinG up your humidifier
Placement
Step 1
Kaz will not accept responsibility for property damage caused by water spillage.
Soak Filter
Step 1
remove tank.
Step 1
Scent Pad
remove tank and locate
Scent Pad slot.
Vicks Scent Pads work with heat to gradually release soothing aromatic vapors.
recommended Usage for the Vicks Menthol Scent Pad (VSP-19 / VSP-19-CAN):
• Not recommended for infants under 10 pounds
• For children between 10-22 pounds do not use more than 2 pads in a 24 hour period.
Ingredients: eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
WARNING: As long as your humidifier is on, the scent pad heater will also be
activated. This area can be warm to the touch.
NOTE: One complimentary scent pad is included with your unit. replace with Vicks Scent
Pads, models VSP-19 / VSP19-CAN or Vicks Sleepy Time VapoPad VBr-5 (only in the USA),
available at most retailers or through Kaz Consumer relations or www.kaz.com.
4
Select a firm, level location at least 6" (15cm) from
any walls for proper airflow. Place the humidifier on a
water-resistant surface, as water can damage furniture
and some flooring.
Step 3
Step 2
Soak the filter in cool water.
Insert new filter into unit
by gently folding and
DO NOT wring filter.
inserting into filter slot.
Step 2
Step 3
Open Scent Pad bag and
Place one new Scent Pad
remove old pad.
with angled side facing
downward into the scent
pad slot. You can use
the bag as a holder
during insertion.
settinG up your humidifier (
'
.)
cont
d
Fill Tank
Step 1
Turn tank upside-down.
remove tank cap by
turning counter-
clockwise
.
operatinG your humidifier
Power
Step 1
Output
Step 1
chanGinG your filter
NOTE: It is recommended that all maintenance be done in the kitchen or bathroom on a water
resistant surface. Remove water tank from unit before moving.
The filter should be changed every 1-3 months depending on your water quality. Keep in mind, depending
on your water quality, mineral deposits can still clog or discolor the filter, affecting its life and that of the
humidifier.
Step 2
Step 3
Fill tank with cool
Once the filled water
tap water.
tank has been placed
on the unit do not move
replace tank cap. Tighten
humidifier. Doing so could
by turning clockwise
.
cause leakage and spills.
Place tank back on
humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FOrCe
THe POLArIZeD PLUG INTO THe OUTLeT; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Set fan speed to desired output:
High ( ) Max Moisture
Medium ( ) everyday Moisture
Low ( ) Night time sound sleep mode
5
Tabla de contenido
